Product composition and characteristics
This product is made by using specialized epoxy resin as the film-forming material, combined with special pigments, fillers, additives, organic solvents, and special curing agents.
It has extremely high adhesion to the substrate, and the cured paint film has excellent corrosion resistance and chemical resistance. The film has small shrinkage, high hardness, good wear resistance, and excellent electrical insulation performance.
Product Usage
Suitable for floor coating in pharmaceutical, electronic, precision instrument, food, chemical and other workshops.
Construction methods
Construction method: brushing and scraping
Construction environment: 15-28 ℃ is suitable, with a relative humidity of 65%.
Coating matching: penetrating primer - intermediate mortar - topcoat
Matching requirements for multi-layer coatings: 24 hours
Construction requirements: After the completion of the topcoat construction, the site should be sealed for dust prevention
Attention: The curing time of the coating (25 ℃) is 7 days, and it is prohibited to use water or other chemical substances for cleaning within 7 days.
physical property 
project
index
project
index
Paint film color and appearance
Flat and smooth, meeting the requirements
Chemical resistance 10% acid and alkali
No bubbles or peeling
Adhesion level
one
Oil resistance 30d
unchanged
Water resistance 25 ℃ for 30 days
No bubbles or peeling
Oil resistance 30d
unchanged
Applicable period h
two
Wear resistance 750g/500r mg
≤ 15