Product composition and characteristics
This product is made with a special bisphenol A epoxy resin as the film-forming material, combined with special pigments, fillers, additives, organic solvents, and a special curing agent.
Dust proof, easy to clean, and good recoating performance.
Excellent physical properties and wear resistance, capable of carrying heavy vehicles, excellent oil, water, corrosion, and chemical resistance.
Product Usage
Widely used for floor coating in workshops of enterprises such as light industry, mechanical manufacturing, chemical industry, and power plants.
Construction methods
Coating matching: penetrating primer - intermediate mortar - putty - topcoat
Composite coating matching requirements: 24 hours
1. Before construction, mix the two components of the slurry evenly and mix them according to the specified proportion until they are even. When preparing the paint, it should be prepared and used on site.
2. After the completion of the topcoat construction, the site shall be sealed against dust.
physical property 
project
index
project
index
Paint film color and appearance
Flat and smooth, meeting the requirements
Oil resistance 30d
No blistering and peeling
Surface drying time h
four
Wear resistance 750g/500r mg
≤ 30
Actual working time h
twenty-four
Pot life 23 ± 2 ℃ h
two
matters needing attention
1. 24 hours (25 ℃) after completion of construction, only walking above is allowed.
2. The curing time of the coating (25 ℃) is 7 days, and it is prohibited to use water or other chemical substances for cleaning within 7 days.