Basic composition
Polyester resin, modified resin, cellulose derivatives, amino resin, pigments, metal pigments, pearlescent pigments, additives, solvents, etc.
Product characteristics
High gloss, high freshness (paired with varnish)
A very normal arrangement of metal pigments with strong three-dimensional effect
Quick drying and good mechanical properties of the surface
Strong covering power and low tendency towards dissolution
Excellent compatibility with topcoat varnish, resistant to biting
Technical indicators
Inspection items, inspection methods, standard indicators
The state inside the container is visually evenly dispersed, without mechanical impurities or hard lumps
The appearance of the paint film is visually smooth and flat, without defects such as pinholes and particles
Adhesion grid method GB/T 9286 Level 0-1
Acid resistance 0.1N H2SO4 GB/T 1763 (23 ℃ × 24 hours) No foaming, wrinkling, or obvious discoloration
Alkali resistance 0.1N NaOH GB/T 1763 (23 ℃ × 24 hours) No foaming, wrinkling, or obvious discoloration
Flexibility bending tester GB/T 6742 1-2mm
Construction parameters
environment condition
Temperature: 15-30 ℃
Humidity: 30-75% RH
Construction conditions
Spray coating: wet to wet twice
Film thickness: 15-20 µ m
Coating preparation
Supporting materials: special diluent
Spray viscosity: 23 ± 2S (coating 4 cups, 23 ± 2 ℃)
Construction process
Spraying - After 5-10 minutes of surface drying of the flashing base paint, spray the top gloss varnish, level it for 5-10 minutes, and then bake it.
Baking conditions: 140 ℃ × 20min
matters needing attention
1. Before use, it is necessary to stir thoroughly and evenly, and it is strictly prohibited to mix water. After each use, it must be tightly covered and sealed to prevent air and moisture from entering.
2. Avoid contact with skin and eyes. If paint comes into contact with skin and eyes, rinse with plenty of water and seek medical attention immediately.
3. Ensure good ventilation and keep away from sparks and open flames.
4. When using, it is necessary to comply with the safety operating procedures and process operating procedures for painting operations, and wear protective clothing correctly.
Storage period
Store in a cool, dry, and ventilated place without opening the packaging, with a shelf life of 1 year; If the storage period is exceeded, inspection should be carried out according to the specified items in the product standard. If it meets the requirements, it can still be used.